| You are here : Process / Instruments and Monitors |
 |
| Orion Low Level Sodium Analyser 2111LL |
 |
The Orion 2111LL Sodium Monitor meets all of the criteria for accurate and dependable sodium monitoring and more. The 2111LL incorporates patented Orion technologies including the:
- ROSS Ultra® electrodes
- Newly developed flow-cell design
- “Marquee” help screen
- Orion Pump-less reagent addition and DKA calibration system
Features
- Accurate and Precise Measurements even at the lowest levels of detection (range 0.001ppb to 10ppm)
- Patented ROSS Ultra Reference and Sensing Electrode
- Patented Flow Cell with air stirring and sample air transport
- Patented “Scrolling marquee”
- Selectable calibration cycles and long reagent usage cycles per bottle
- “Pump-less” liquid handling system
- Double known Addition Calibration Method
- Simple Calibration Sequence
- Whole Monitor fits on 1811EL “footprint” and electronics can be remotely mounted up to 3 meters away from Fluidics using optional electrode extension cables.
- Auto-ranging electronics with large, backlit and easy to read LCD display
- 2 galvanically separated signal outputs (4-20mA) with freely scaleable linear and logarithmic outputs
Specifications:
Range: 0.001ppb-10ppm
Accuracy: +/-5% or 0.01ppb whichever is greater
Response Time: 95% within 2 minutes with freshly etched electrode |
 |
| Orion Low Level Chloride Analyser 1817LL |
 |
Features:
- Measures down to 5 ppb chloride
- Low cost of operation
- QC Sampling Capability:
- Validation using standards
- Grab samples
- Alternative to lab analyses
- Integrated sample temperature control for lower levels of detection
- Low maintenance
- Ease of calibration
Applications:
- Boiler water chloride measurements
- Equilibrium Phosphate Treatment (EPT) chloride measurements
- RO Effluent
|
|
| Orion Hydrazine Analyser 2118XP |
 |
The NEW Thermo Scientific Orion 2118XP oxygen scavenger monitor offers unmatched results for the control and optimization of oxygen scavenger systems. Control spending and protect your system using the Orion 2118XP - the perfect balance of performance and ease of use. The Orion 2118XP is ideally suited to monitor oxygen control in feedwater, boiler water, deaerator inlet/outlet, condensate discharge and economizer inlet. Ensure a sufficient amount of oxygen scavenger without upsetting system pH or additional expense. The Orion 2118XP provides stable, drift-free measurements with minimal maintenance and less frequent calibrations.
Applications:
- Boiler Feedwater
- Hydrazine
- ELIMIN-OX®
- DEHA and other Carbohydrazides
|
|
| Orion Low Level DO Analyser 1816DO |
 |
Features:
- Low-level detection - 0.1 ppb
- Galvanic cell with low-level guard ring
- 316 stainless steel flow cell
- Digital LCD readout
- Built in alarms and relays
- Pre-assembled Teflon®† membrane module for easy replacement
Applications:
- Boiler feed water
- Ultra pure water
- Process steam
- Deaerator outlet
- Condensate
- Oxygen feed control for plants using oxygen treatment chemistry
Specifications:
Measuring Range: 0.1 ppb-300ppb dissolved oxygen
Calibration Range: 0-10 ppm oxygen in water saturated air
Accuracy: 0.1 ppb+/- 2%, whichever is greater
Response Time: 1minute, from high to low levels
|
|
| Orion Fluoride Monitor 2109XP |
 |
The Orion 2109XP fluoride monitor offers accuracy, reliability and ease-of-use to best meet the demands for fluoride analysis with complete assurance. The Orion 2109XP maximizes uptime and keeps your plant in perfect operation by offering unmatched versatility and performance.
Applications:
- Fluorination Control
- Fluoride Level Monitoring
Specifications:
Specific Ion Measurements: Range 10ppb to 200ppm
Resolution: 1,2,3 digits
Accuracy: +/-10% or 10ppb whichever is greater
Reagent: Formic Acid
Response Time: Reach 95% of final reading within 2 minutes of injecting a standard solution. |
|
| Orion Ammonia Monitor 2110XP |
|
The Orion 2110XP indicates the most sensitive changes in ammonia concentration for condensate, and feedwater optimization and control. Often plants will use conductivity or pH to control ammonia, however these methods are negatively influenced by other ionic species from the boiler treatment chemicals in the sample. Our monitor maintains sensitivity and accuracy at high and low levels to produce rapid results with the utmost confidence. The 2110XP provides stable and drift-free measurements with minimal maintenance and eliminates the need for frequent calibrations, saving you time and money.
Applications:
- Boiler Feed water
- Condensate
|
|
| Orion Calcium Hardness Monitor 2120XP |
|
The NEW Thermo Scientific Orion 2120XPcalcium hardness monitor detects calcium as the major component of hardness in real time - providing accurate and reliable results that you can count on. Limiting the costly effects of improper water purification has never been easier. The monitor continuously displays levels of calcium hardness to prevent against boiler tube scaling, corrosion, water flow restriction and the loss of heat transfer efficiency for power generation applications. The Orion 2120XP provides early detection of breakthrough due to zeolite softening depletion - maximizing your process integrity while maintaining the best possible return on investment.
Applications:
- Water Softening
- Zeolite Softener Effluent Monitoring
- Blending Applications
|
|
| Orion Low Level Phosphate Analyser 2095 |
Features:
- 0.006ppm detection limit
- 1 or 2 reagent addition method
- 6 stream capability
- Easy of use with digital alphanumeric readout
- Grab sample capability
- Accurate reagent metering for low and high levels
- Fully programmable for individual needs-10 stored methods
- Fully programmable AUTOCAL
- Analog and digital outputs
- Stores last 25 calibrations and last 120 measurements.
Applications:
- Demineralizer effluent
- Boiler water
|
|
| Orion Silica Monitor 2030 |
 |
Features:
- 0.5 ppb detection limit
- 3 reagent addition CEGB method
- 6 stream capability(1 standard)
- Easy of use with digital alphanumeric readout
- Grab sample capability
- Accurate reagent metering for low and high levels
- Fully programmable for individual needs-10 stored methods
- Fully programmable AUTOCAL
- Analog and digital outputs
- Stores last 25 calibrations and last 120 measurements.
Applications:
- Demineralizer effluent
- Boiler water
|
|
|
| pH/Cond/DO/Chlorine/ Turbidity Analyser |
 |
U-50 series Multi-parameter water quality checker enables to measure and indicate the monitoring result simultaneously up to 11 parameters with one unit. Tough & powerful design, considering user friendly field monitoring on site, such as rive, ground water, drainage water, etc. bring together feature of function and performance, which makes simple operation for everybody.
Features
- High sensitive turbidity sensor incorporated (U-52, U-53).
- Membrane cap makes stress-free maintenance when dissolved oxygen sensor replacement.
- Hand-held transmitter and sensor probe enable one-handed operation to make easy operation and data confirmation.
- One touch calibration makes easy maintenance for pH, DO, conductivity, turbidity, and water depth.
|
|
| Online TOC Analyser for Process Water/ Raw Water/ Ultra Pure Water |
 |
The Sievers* 5310 C On-Line Total Organic Carbon (TOC) Analyzer was designed specifically for the municipal drinking water market for continuous monitoring of
raw, finished and plant process waters. It offers superior accuracy and precision across a dynamic operating range of 4 parts per billion (ppb) to 50 parts per million (ppm) TOC.
The 5310 C On-Line Analyzer was engineered for ease of use and cost-effective operation. It simplifies monitoring and enhances productivity with automated procedures such as calibration, verification, reagent adjustment, and percent removal calculation. The low maintenance 5310 C needs no external reagents or gas supplies, and offers 12-month calibration stability. |
|
|
|
